Our Archive

This is the most recent project from Ag Enterprise Supply. Customer wanted a 50 gallon pull behind sprayer for grounds maintenance at a local college. A 10′ spray bar and a hand gun with 50′ of high pressure hose is all that is needed to bounce from application to application. A custom wire harness is […]

Read more

Spray trailer with 6500 gallons of storage plus 350 gallons of bulk chemical storage. Cutout and tie downs for two 30 gallon drums and big shuttle or pallet of dry. Central mix station inductor and valve location for ease of control and time savings. Customer absolutely loves this setup due to his increased productivity. The […]

Read more

Test plot sprayer for USDA in Pendleton, OR. Customer wanted to spray 12’ or 24’ for different plot widths. One hundred gallon capacity with a 7 gallon small tank for smaller plots that is also used for inducting chemical or rinse into big tank. Five boom sections but not with automatic section control. Customer also […]

Read more

Here is a 68 gallon low profile UTV sprayer to fit either a John Deere Gator or Polaris Ranger. This is a nice sprayer when capacity and low center of gravity are a concern. The tank does not inhibit rear view of the machine allowing for great visibility when backing up or watching behind. The […]

Read more
300-gal-pull-sprayer

This is a 300 gallon tow behind sprayer. The axle location gives plenty of tongue weight as to eliminate a bouncy rough ride when the volume decreases. An 80” center swath and two boomless nozzles give this sprayer an overall coverage of about 35’. This particular model was designed to completely disassemble as it is […]

Read more